Have you installed a Linksys Velop mesh WiFi system in order to access a lag-free internet connection in your home? Yes, but, what happened? Your Linksys Velop tri-band mesh extender is flashing red? No worries, because this piece of writing will help you a lot. Here, we have summed up a list of troubleshooting hacks that will help you fix the issue within a matter of minutes. Continue reading.
Fixed: Linksys Velop Red Light Issue
- Check the Power Outlet
Is your Linksys Velop tri-band extender receiving a fluctuation-free electricity supply? Probably not. It can happen due to a damaged wall outlet.
To get rid of the issue, plug your Linksys Velop extender into another wall outlet and check if the red light issue has been fixed.
- Relocate Your Linksys Velop Extender
Have your placed your Linksys Velop tri-band mesh extender at the right location? Have you placed it in an airy space? If the answer to both the questions is no, then it is time to change the location of your Linksys Velop system.
While relocating your Linksys Velop extender, ensure that it is placed in a well-ventilated area. Besides, consider placing your WiFi device away from corners, thick concrete walls, mirrors, fish tanks, microwave ovens, baby monitors, Bluetooth speakers, refrigerators, etc. Such things can divert the WiFi signals of your Linksys Velop extender.
- Check the Wired Connection
You can also struggle with the Linksys Velop red light issue if the wire connecting your extender and the router is not working properly. Chances are that either the Ethernet cable is damaged or not connected properly.
To fix the issue, replace the Ethernet cable with the new one and check if the Linksys Velop tri-band extender is still flashing red light. If it is, move to the next troubleshooting hack.
Quick Tip: Your Linksys Velop system might also flash red light due to an issue from the end of your Internet Service Provider. Therefore, get in touch with your ISP and inquire about the same. If he agrees that the internet issue is from his end, then ask him to get it resolved.
- Update the Firmware
The firmware of your Linksys Velop extender helps in maintaining coordination between the hardware and software. It means that the flashing of the red light on your extender is connected with outdated firmware. Therefore, you can fix the issue by updating the firmware of your Linksys Velop tri-band extender.
Here are the steps to update the firmware of your Linksys Velop mesh WiFi extender:
- Unlock your mobile device and launch the Linksys app.
- Fill in the Linksys Velop login details to reach the extender’s dashboard.
- Now, tap the Menu icon to reveal a list of options.
- Thereafter, tap Network Administration and then select the Update Now option.
Your Linksys Velop tri-band mesh extender will now operate on its updated firmware version.
- Reconfigure Your Linksys Velop System
Chances are that you’ve not configured your Linksys Velop tri-band extender properly due to which you are facing the red light issue. Therefore, you need to perform the Linksys Velop setup accurately. But, before you do that, you need to restore your WiFi device to the factory default settings.
Given below are the steps to reset your Linksys Velop tri-band mesh WiFi extender:
- First of all, ensure that your Linksys Velop extender is getting an adequate electricity supply.
- Thereafter, look for the Reset button on your Linksys tri-band extender.
- Once found, grab a pin-like object and use it to press the Reset button.
- Your Linksys Velop mesh extender will get restored to the factory default settings.
Now, set up your extender from scratch using the Linksys app. This time you’ll definitely get rid of the red light issue.
In the Nutshell
The Linksys Velop red light issue can ruin anyone’s internet usage experience. We hope that the aforementioned tips will help you in resolving the issue and your Linksys Velop tri-band extender will return to its normal state.
Pingback: Tips and Tricks to Fix Linksys Velop Red Light ...